該機采用高倍率光學測量系統，裝有旋轉編碼器的測微目鏡可進一步提升測量過程自動化的程度�？蓽y定鋼、有色金屬、IC薄片、薄塑料、金屬薄片、涂層、表面覆層、層壓金屬、熱處理碳化層和淬火硬化層的深度與硬度梯度。是一款價廉實用性強的數顯顯微硬度計。

    MVS-1000A1/D1 digital micro hardness tester new form of dollars, beautiful, and it has a good reliability, interoperability and intuitive. By measuring the length of the diagonal indentation directly in the LCD screen hardness. No keyboard input through the calculation of the value of hardness.

     The aircraft used high-rate optical measuring system, equipped with a rotary encoder of the eyepiece micrometer will further enhance the process of measuring the degree of automation. Determination may be steel, nonferrous metals, IC thin, thin plastic, foil, coating, surface coating, laminated metal, heat treatment hardening quenched carbide layer and layer of depth and hardness gradient. Is a cheap and practical for a digital micro-hardness. 

 

技術規格	Main technical parameters
顯微硬度標尺:	Vickers scales:
HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1	HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1
顯示:自動讀數菜單顯示5位數的硬度值	Display: Hardness value   5-digit
4位數的對角線長度（D1，D2）	Diagonal length  4-digit(D1,D2)
試驗力,保持時間,測試次數,返回	Load duration    Dwell time(sec)
	Statistics       No.
	Return
試驗力(gf):10，25，50，100，200，300，500，1000	Test force(gf):10，25，50，100，200，300，500，1000
加載控制:自動（加載/保持/卸載）	Load control:automatic(loading/dwell/unload)
試驗力保持時間(s):5～60	Total test force dwell time(S):5~60
試驗力選擇:外置式選力旋鈕	Test force selection:External force election knob
物鏡放大倍數:10×，40×	Objective magnification:10×，40×
光通道:雙光通道（目鏡及CCD攝象通道）	Optical path:2-way switchable(eyepiece and camera)
測量目鏡:自動數字式編碼器	Measuring eyepiece:Automatic digital encoders
總放大倍數(μm):100×（觀察）, 400×（測量）	Total magnification:100×（Observation）,400×（measurement）
硬度測量范圍:(5-2500)HV  (對角線長度范圍:200μm)	Degree of hardness test seope:(5-2500)HV
	(Length of the diagonal range: 200μm)
分辨率(μm):0.01	Resolution:(μm):0.01
XY試臺     尺寸(mm):100×100	XY stage   Dimensions(mm):100×100
行程范圍(mm):25×25	Travel range(mm):25×25
最小讀數(mm):0.01	Minimum reading: 0.01
試件最大高度(mm):85（2.55")	Max height of speciments(mm)：85（2.55")
試件最大寬度(mm):120(3.35")(從壓頭中心線至機壁距離）	Distance from indeneter's center to outerwall(mm)：120
輸出:內置微型打印機(選配)，（RS232串行接口）	Output:built-in printer(Select Configure),RS232 serial
電源電壓:AC220V/50HZ	Power supply:AC220V/50HZ
外形尺寸(mm):490×310×515	Dimensions(mm):490×310×515
重量(kg):35	Weight(kg):35