Technical details Connection G1/2, Namur Nominal size 14 mm Temperature range -10°C ... +70°C Medium Filtered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4, instrument air, free of aggressive additives. Alternatively the pressure dew point must be at least 10°C below lowest occurring ambient temperature. Materials Body: Al (anodized), plastic, seals: NBR and POM, inner parts: Al, steel rostfrei and brass Protection IP 65 according to EN 60529 5/2- way-valves 14 4 2 5 1 3 14 4 2 5 1 3 MN-22-510-HN-xxx 5/2-way, single solenoid, air spring return MN-22-511-HN-xxx 5/2-way, single solenoid, mechanical spring return Electrical options Nominal voltage Power consumption Specifics Plug connection*1 -xxx 12 V DC 4.2 W Form B industrial norm -411 12 V DC 2.2 W max. 8 bar Form B industrial norm -431 24 V DC 4.2 W Form B industrial norm -412 24 V DC 4.2 W M 12 -O12 24 V DC 2.2 W max. 8 bar Form B industrial norm -432 24 V DC 2.5 W max. 8 bar M 12 -O32 24 V AC 7/4 VA Form B industrial norm -422 115 V AC 7/4 VA Form B industrial norm -426 230 V AC 7/4 VA Form B industrial norm -427 *1 Plug socket not included, suitable plug sockets see page 3. 3/2-Wege-Ventile 2 1 3 12 3 MN-22-311-HN-xxx 3/2-way, single solenoid, mechanical spring return, NC 02 Subject?to?change Valves > standardized valves > electrically operated > Series MN-22 NAMUR Technical data Dimensions M-04-310-HN. MO-04-310-HN MN-22-51x-HN 210 40 36 ? 6.5 201 70 45 83 1 = pressure inlet 2,4 = outlets 3,5 = exhausts 36 36 Plug socket (not included in scope of delivery) can be repositioned by 180°. Solenoid coil can be repositioned by 4 x 90°. 5 1 3 4 2 Model-no.: MN-22-311 MN-22-510 MN-22-511 Operating pressure* (bar) 3 ... 10 1 ... 10 3 ... 10 Pilot pressure* (bar) 3 ... 10 1 ... 10 3 ... 10 Flow rate (Nl/min) 3300 3300 3300 Response time (ms) at 6 bar on: 28 off: 68 on: 30 off: 59 on: 20 off: 80 Weight (kg) 1.10 1.10 1.10 * max. 8 bar at 2.2 W and 2.5 W M-04-310-HN, MO-04-310-HN MN-22-31x-HN 210 40 36 ? 6,5 201 70 45 83 1 = pressure inlet 2 = outlet 3 = exhaust 72 Plug socket (not included in scope of delivery) can be repositioned by 180°. Solenoid coil can be repositioned by 4 x 90°. 3 1 3 2 valves > electrically operatede valves > Subject?to?change 03 Valves > electrically operated valves > accessories > Plug sockets Form B according to DIN EN 175301-803 Overall width 22 mm Contact distance 10 mm Contacts 2P + E Protection IP 65 according to EN 60529 requires a flat gasket For use with series Model-no.: 28-ST-01-G Voltage (AC/DC) 0 - 250 V Status indicator no Protective circuit no Connecting cable without Wire cross section max. 1.5 mm2 ? Connecting cable 6 - 8 mm Form B according to DIN EN 175301-803 Form B industrial norm