<wbr id="0p4dr"><legend id="0p4dr"></legend></wbr>
  • <wbr id="0p4dr"></wbr>

  • <sub id="0p4dr"><listing id="0p4dr"></listing></sub>
    <form id="0p4dr"><span id="0p4dr"><track id="0p4dr"></track></span></form>

    <sub id="0p4dr"></sub>
    <form id="0p4dr"></form>
      • 山東銀焊條包郵全國飛機牌銀焊條
        發布者:南京晶騰焊接材料有限公司  發布時間:2019-12-14 16:46:36  訪問次數:250

         

        Silver
        brazing

        銀釬焊

        QJ101

        Silver brazing flux
        銀釬焊熔劑

        Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
        550-750范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑

        QJ102

        Silver brazing flux
        銀釬焊熔劑

        Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
        600-850范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑

        QJ102A

        Silver brazing flux
        銀釬焊熔劑

        Brazing flux of copper, copper alloys, steel and stainless steel within 600-850. Non agglomeration.
        600-850范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊

        QJ112

        Silver brazing paste flux

        膏狀銀釬焊熔劑

        Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
        600-850范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑

        QJ103

        Silver brazing flux
        銀釬焊熔劑

        Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
        550-750范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑

        Aluminum brazing

        鋁釬焊

        QJ201

        Aluminum brazing flux
        鋁釬焊熔劑

        Brazing flux of aluminum and aluminum alloys within 450-620.
        450-620范圍釬焊鋁及鋁合金的助熔劑

        QJ207

        Aluminum brazing flux
        鋁釬焊熔劑

        Brazing flux of aluminum and aluminum alloys within 560-620.
        560-620范圍釬焊鋁及鋁合金的助熔劑


        Category
        類別

        Trade-
        mark
        牌號

        Chemical
        composition
        化學成份(%)

        Hardness
        硬度

        Application
        用途

         

        Oxy-
        Acetylene
        Flame
        spray-
        using

         

         

         

         

         

        F103

        Cr10 B1.5 Si3 Ni Rem.

        HRc 25

        Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.
        鑄鐵件的噴焊,如玻璃模具,汽缸、導軌

        F101

        Cr10 B2.5 Si3 Ni Rem.

        HRc 45

        Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.
        耐磨、耐蝕件的噴焊,如閥門、泵轉子、泵柱塞

        F101Fe

        Cr10 B2.5 Si3 Fe10

        Ni Rem.

        HRc 45

        Spray-fusing of corrosion-resistant parts, such as axle and stigma.
        耐磨件的噴焊,如軸類、汽門

        F102

        Cr16 B4 Si4 Ni Rem.

        HRc 60

        Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.
        耐磨、耐蝕、抗高溫氧化工件的噴焊,如模具、柱塞

        F102Fe

        Cr16 B4 Si4 Fe15

        Ni Rem.

        HRc 60

        Spray-fusing of corrosion-resistant parts, such as axle and cold die.
        耐磨件的噴焊,如軸類、冷模具

        F105

        F102+50%WC

        HRc 60

        Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.
        抗磨粒磨損場合的噴焊,如導板、刮板、風機葉片

        F105Fe

        F102Fe+35%WC

        HRc 60

        Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.
        抗磨粒磨損場合的噴焊,如導板、刮板、風機葉片

        F108

        F102+80%WC

        HRc 60

        Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
        抗強烈磨粒磨損,無需加工場合的噴焊,如挖泥船耙齒

        F301

        Cr5 B4 Si4 Ni30

        Fe Rem.

        HRc 45

        Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.
        農機,礦山機械易損件的噴焊,如齒輪,車軸

        Track iron powder

        軌鐵粉

        Cr5 B1.5 Si3 Ni30

        Fe Rem.

        HRc 28

        Repair spray-fusing of defects such as scratch and concavity of railroad track.
        鐵路鋼軌擦傷、低塌等缺陷的修復噴焊

         

        Oxy-acetylene flame spraying

         

        F111

        Cr5 B1.5 Si3 Ni30

        Fe Rem.

        HB 150

        Spraying of bearing and cutting parts etc.
        軸承、切削件等的噴涂

        F113

        Cr10 B1.5 Si3 Ni Rem.

        HB 250

        Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.
        噴涂亦可噴焊,如滾筒、柱塞、耐蝕耐磨軸等

        F313

        Cr15 B1.5 Fe Rem.

        HB 250

        Spraying of dryer of papermaking and axle.
        造紙烘缸、軸類的噴涂

        F314

        Cr18 Ni9 B1.5 Fe Rem.

        HB 250

        Spraying of axle.
        軸類噴涂

        F412

        Sn10 P0.3 Cu Rem.

        HB 80

        Spraying of axle and bearing.
        軸、軸承的噴涂

        F512

        復合Al5Ni95

         

        Backing spray of transition layer between base and working layer.
        噴涂層的基體與工作層之間過渡(打底)層用噴涂

         

        PTA

        hardfacing

        F221

        Cr26 W5 B0.7 Co Rem.

        HRc 43

        PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.
        高溫高壓閥門密封面、熱剪切刃口的等離子噴焊

        F223

        Cr21 W5 B1.5 Co Rem.

        HRc 40

        PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.
        高溫下耐磨耐蝕件的噴焊,如高溫高壓閥門、鼓風機

        F321

        Cr13 B1.5 Si1 Fe Rem.

        HRc 45

        PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.
        中溫中壓閥門的閘板及其他耐磨件的等離子噴焊

        F322

        Cr23 Ni13 Si5 B1

        Fe Rem.

        HRc 40

        PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.
        中溫中壓閥門的閥座及其他耐磨件的等離子噴焊

        F422

        Sn10 P0.3 Cu Rem.

        HB 80

        PTA hardfacing of axle and bearing etc.
        軸、軸承等離子噴焊





        (1) HAG-2B銀焊條銀焊料 含銀2%銀焊條銀焊料 等同美標AWS BCuP-6銀焊條銀焊料、國標BCu91PAg銀焊條銀焊料及L209銀焊條銀焊料,具有良好的流動性和填充能力,廣泛用于空調、冰箱、機電等行業,銅及銅合金的釬焊。熔點645-790攝氏度。  

          (2)HAG-5B銀焊條銀焊料 含銀5%銀焊條銀焊料 等同于美標AWS BCuP-3銀焊條銀焊料國標BCu88PAg銀焊條銀焊料及L205銀焊條銀焊料,有一定塑性,適用不能保持緊密配合的銅及其合金接頭的焊接。熔點645-815攝氏度。  
          (3)HAG-15B銀焊條銀焊料 含銀15%銀焊條銀焊料 等同于美標AWS BCuP-5銀焊條銀焊料國標BCu80AgP銀焊條銀焊料及L204銀焊條銀焊料,具有接頭塑性好,導電性提高,特別適用間隙不均場合?赦F焊承受振動載荷的銅及其合金接頭的釬焊。熔點645-800攝氏度。  
        銀銅鋅環保焊料(銀釬料)牌號及性能簡介 
          牌號                   性能簡介  
          (1) HAG-18BSn銀焊條銀焊料 含銀18%銀焊條銀焊料 是銀、銅、鋅、錫合金,熔化范圍稍高,潤濕性和填充性良好,價格經濟?珊附鱼~、銅合金、鋼等材料。熔點770-810攝氏度。  
          (2) HAG-25B銀焊條銀焊料 含銀25%銀焊條銀焊料 等同于國標BAg25CuZn銀焊條銀焊料及L302銀焊條銀焊料,是銀、銅、鋅、合金,具有較好的潤濕性和填充性,但熔點稍高,可焊銅、鋼等材料。熔點700-800攝氏度。  
          (3)HAG-25BSn銀焊條銀焊料 含銀25%銀焊條銀焊料 等同于美標AWS BAg-37,是銀、銅、鋅、錫合金,熔點低于HAg-25B銀焊條銀焊料,提高了潤濕性和填充性?珊搞~、鋼等材料。熔點680-780攝氏度。  
          (4)HAG-30B銀焊條銀焊料 含銀30%銀焊條銀焊料 等同于美標AWS BAg-20銀焊條銀焊料,國標BAg30CuZn銀焊條銀焊料 ,是銀、銅、鋅合金,熔點稍高,接頭有較好韌性,可釬焊銅、銅合金、鋼等材料。熔點677-766攝氏度。  
          (5)HAG-35B銀焊條銀焊料 含銀35%銀焊條銀焊料 等同于美標AWS BAg-35銀焊條銀焊料,是銀、銅、鋅合金,中等熔化溫度,接頭有較好韌性,可釬焊銅、銅合金、鋼等材料。熔點621-732攝氏度。  
          (6) HAG-35Sn銀焊條銀焊料 含銀35%銀焊條銀焊料 等同于國標BAg34CuZnSn銀焊條銀焊料,是銀、銅、鋅、錫合金,中等熔化溫度,有較好的流動性,更適用于鐵素體和非鐵素體鋼的焊接。熔點620-730攝氏度。  
          (7) HAG-40B銀焊條銀焊料 含銀40%銀焊條銀焊料 是銀、銅、鋅、合金,具有較好的流動性、滲透性和韌性,熔點677-732攝氏度。  
          (8)HAG-40BNi銀焊條銀焊料 含銀40%銀焊條銀焊料 是銀、銅、鋅、鎳合金,等同于美標AWS BAg-4銀焊條銀焊料,具有較好的抗蝕性、適用于不銹鋼的焊接和鎳基合金及炭化鎢的焊接,熔點670-780攝氏度。
      免責聲明:焊材網轉載作品均注明出處,本網未注明出處和轉載的,是出于傳遞更多信息之目的,并不意味 著贊同其觀點或證實其內容的真實性。如轉載作品侵犯作者署名權,或有其他諸如版權、肖像權、知識產權等方面的傷害,并非本網故意為之,在接到相關權利人通知后將立即加以更正。聯系電話:0571-87774297。
      0571-87774297  
      91精品国产综合久久婷婷